One Button runs Two macros?

[Goahead]

Hi Philippe

Thank you for the fast anwser.

Unfortenatly, not all my modules have scene option available.

So maybe i should use the Hager TK 015 that i also have in cabinet.
"Luminare scenario Module"

Do you have experience in this module?

I can make 8 groups for each scenario..each group can be ON, OFF, UP
or down.
I define a group1 as ON and group 2 as OFF (the other 6 groups will
not be used)
I put all output modules to be off in off adress, and the others to ON
adress.
Now in ETS i have:
Scenarios 1/2 - Selection de scenarios
Scenarios 3/4 - Selection de scenarios
Scenario 1-4 - Programmation

Please correct me..
If i want to select scenario 1, i need to have a push button to recall
scenario 1, in same adress of "Scenarios 1/2 - Selection de
scenarios"..i cant use a push button thats calls only "scenario"!!! it
must call "scenario 1" especifying the number of scenario?....

I want to use Jung ES2092 or ES2072 but i doesnt have the scene
funtion???
Ok..So if i use a ABB US/S 4.2 in input A, i can configure "Switch
actuator group A, B,C or D"...but does group A = Scenario 1??

Maybe what i have wrote is a bit confusing....

Please can someone sugest me a way to do this with modules Jung
ES20**, or ABB US/U4.2 using TK 015 from Hager

Thx in Advance
Goahead