N148/22 et passage en multi connexion

[marc.assin]

On 29 oct, 13:51, sprint95 <sprint...@free.fr> wrote:
> Quelqu'un aurait il un truc et astuce pour m'aider à y arriver ?


"Note
For stable communication via KNXnet/IP Tunneling the
IP Interface must use a separate individual address for
each KNXnet/IP Tunneling connection. These
additional individual addresses must be different from
the individual address of the device and must not be
used by any other bus device. In ETS these individual
addresses should be reserved by proxy devices."

Et qui plus est, ce n'est pas 4 mais 5 tunnels !

"The IP Interface N148/22 provides up to five KNXnet/IP
Tunneling connections, allowing for e.g. simultaneous
configuration with ETS3 and operation of a
visualization."