Plantage eibd

[proof42]

Hello,
After patching and rebuilding eibd, eibd is running, but il can't connect to the Siemens 148-1AB22.
I used the command: ./eibd -t65535 -i ipt:192.168.1.19
The result is that eibd fails to connect and loops (connectretry loops), as shown below (I stopped eibd after a few loops):
ubuntu@ubuntu-VirtualBox:~/knx/local/bin$ ./eibd -t65535 -i ipt:192.168.1.19
Layer 2(088B1668,538AFEB5) Open
Layer 0(088B1B30,538AFEB5) Open
Layer 0(088B1B30,538AFEB5) Openend
Layer 2(088B1668,538AFEB5) Opened
Layer 3(088D2278,538AFEB5) Open
Layer 8(088B1C10,538AFEB5) OpenInetSocket 6720
Layer 8(088B1C10,538AFEB5) InetSocket opened
Layer 4(088F2960,538AFEB5) GroupCacheInit
Layer 1(088B1B30,538AFEB5) Send(020): 08 01 0A 00 02 0F 0E 58 08 01 0A 00 02 0F 0E 58 04 04 02 00
Layer 0(088B1B30,538AFEB5) Send(026): 06 10 02 05 00 1A 08 01 0A 00 02 0F 0E 58 08 01 0A 00 02 0F 0E 58 04 04 02 00
Layer 1(088B1668,538AFEBF) Connectretry
Layer 1(088B1B30,538AFEBF) Send(020): 08 01 0A 00 02 0F 0E 58 08 01 0A 00 02 0F 0E 58 04 04 02 00
Layer 0(088B1B30,538AFEBF) Send(026): 06 10 02 05 00 1A 08 01 0A 00 02 0F 0E 58 08 01 0A 00 02 0F 0E 58 04 04 02 00
Layer 1(088B1668,538AFEC9) Connectretry
Layer 1(088B1B30,538AFEC9) Send(020): 08 01 0A 00 02 0F 0E 58 08 01 0A 00 02 0F 0E 58 04 04 02 00
Layer 0(088B1B30,538AFEC9) Send(026): 06 10 02 05 00 1A 08 01 0A 00 02 0F 0E 58 08 01 0A 00 02 0F 0E 58 04 04 02 00
Layer 1(088B1668,538AFED3) Connectretry
Layer 1(088B1B30,538AFED3) Send(020): 08 01 0A 00 02 0F 0E 58 08 01 0A 00 02 0F 0E 58 04 04 02 00
Layer 0(088B1B30,538AFED3) Send(026): 06 10 02 05 00 1A 08 01 0A 00 02 0F 0E 58 08 01 0A 00 02 0F 0E 58 04 04 02 00
^CLayer 8(088B1C10,538AFED4) StopServer
Layer 8(088B1C10,538AFED4) Server ended
Layer 4(088F2960,538AFED4) GroupCacheDestroy
Layer 4(088F2960,538AFED4) GroupCacheClear
Layer 3(088D2278,538AFED4) Close
Layer 2(088B1668,538AFED4) Close
Layer 0(088B1B30,538AFED4) Close
Siemens device is pingable at 198.168.1.19.
I've tried to enable multiple personnal adresses and pushed de program button within 5 and 10 sec, but il didn't change anything.
I acceded then to Siemens device with ETS4 under Windows, without problem, ip=198.168.1.19, and personnal adress is now 1.1.136.
I tried then with an usb connection using a Siemens 148-1AB11, activating the connection usb for this device in the virtual machine, but ./findknxusb does'nt find any device.
Have you got ideas?